Our Services
MCM provides engineering, materials, manufacturing and technology development capabilities for demanding industrial, aerospace, defence, security, select motorsport and specialised applications.
Our services can be engaged at different levels, from focused engineering consultations and technical development through to fully managed engineering and manufacturing programmes. This allows our clients to access the level of capability, resources and programme involvement appropriate to their requirements.
The right level of engagement
You do not need to determine which MCM service you require before contacting us.
Following the initial consultation, we will assess the nature and scope of the requirement and recommend the appropriate engagement structure.
For straightforward technical requirements, this may mean a focused consultation.
For defined engineering challenge, it may develop into a dedicated development project.
For complex or multidisciplinary requirements, MCM can establish a fully managed engineering programme drawing on the breadth of our technical and manufacturing capabilities.
-
Complimentary 30-Minute Initial Consultation.
Every MCM engagement begins with an initial conversation. This complimentary 30-minute consultation provides an opportunity to discuss your requirement at a high level, understand the objectives and establish the technical, commercial and programme considerations involved.
It also allows our team to determine which of MCM’s capabilities may be relevant and recommend the most appropriate level of engagement.
No commitment. No obligation. Simply an initial discussion to establish the right route forward.
-
Targeted Technical Expertise
For requirements where specialist engineering knowledge, technical assessment or independent input is required.
Consultation engagements may include technical discussions, design reviews, feasibility assessments, material and manufacturing considerations, engineering advice and early-stage technical direction.
These engagements are intended to provide focused expertise without requiring MCM to undertake a wider development programme.
TYPICAL ENGAGEMENT → Short-Term
-
Defined Engineering & Development Projects
For clients requiring MCM to undertake substantive engineering and development work.
Development projects can incorporate engineering and design, material selection, computational and manufacturing-led optimisation, prototyping, testing, validation and technical refinement.
The scope is defined around the required technical outcome, with agreed deliverables and milestones established at the outset.
TYPICAL ENGAGEMENT → 3-6 Weeks
-
Multidisciplinary Engineering Delivery.
For complex requirements requiring multiple engineering disciplines, technologies or stages of development.
Engineering programmes can bring together MCM’s core capabilities across Engineering & Design, Advanced Materials, Precision Manufacturing, Advanced Fabrication, Systems Integration and Technology Development.
Depending on the requirement, programmes may encompass concept development, detailed engineering, prototyping, tooling, manufacture, testing, validation, integration and production preparation.
Each programme is structured around defined objectives, technical milestones and deliverables, with MCM coordinating the engineering activities required to achieve the agreed outcome.
Our Services
Advanced Fabrication, Specialist Manufacturing & Component Assembly
MCM provides advanced fabrication services for the production of specialist components, structures and assemblies where conventional manufacturing approaches may not provide the required flexibility, geometry or material capability.
Our fabrication capability brings together modern manufacturing processes, engineering expertise and specialist finishing to produce development hardware, low-volume components and production-ready assemblies.
We can support fabrication as an individual service or integrate it with MCM’s engineering, materials and precision manufacturing capabilities to deliver more complex requirements.
CAPABILITIES
Advanced Fabrication → Manufacture of specialist components and structures using application-specific fabrication processes.
Composite Fabrication → Fabrication and assembly of engineered metal components and structures.
Composite Fabrication → Fabrication of composite components, structures and associated assemblies.
Jigs, Fixtures & Tooling → Development and manufacture of specialist tooling and fixtures for fabrication and production.
Component Assembly → Assembly and integration of manufactured components into defined subassemblies.
Prototype Fabrication → Rapid development of physical hardware, test articles and engineering demonstrators.
Finishing & Preparation → Surface preparation, finishing and preparation of components for subsequent assembly or use
Low-Volume Production → Repeatable manufacture of specialist components and assemblies in controlled quantities.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine - Select Automotive
MCM’s advanced fabrication capability supports requirements ranging from individual components and development hardware through to integrated assemblies and wider engineering programmes.
CNC Machining, Precision Engineering & Low-Volume Manufacturing
MCM provides precision manufacturing services for complex components, tooling and assemblies where dimensional accuracy, repeatability and controlled production are critical.
Our manufacturing capability is built around advanced CNC machining and digitally defined production, supporting the manufacture of prototype, development and low-volume components across a range of engineering materials.
Manufacturing is integrated with our engineering and design capability, allowing components to be developed with machining strategy, material behaviour, inspection and production requirements considered from the outset.
CAPABILITIES
CNC Machining → Precision manufacture of complex components using advanced CNC equipment.
3-Axis & 5-Axis Machining → Multi-Axis machining for complex geometries, difficult features and reduced setup requirements.
Precision Components → Manufacture of engineered components to defined dimensional and technical requirements.
Prototype & Development Machining → Rapid production of development hardware, test components and engineering prototypes.
Low-Volume Manufacturing → Repeatable production of specialist components and assemblies in controlled quantities.
Tooling & Fixtures → Manufacture of production tooling, jigs, fixtures and specialist manufacturing aids.
Engineering Materials → Machining of metals, engineering polymers, composites and other application-specific materials.
Manufacturing Optimisation → Machining strategy and design optimisation to improve manufacturability, repeatability and production efficiency.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine - Specialist Automotive
MCM’s precision manufacturing capability can operate as a standalone production service or as part of an integrated engineering programme encompassing design, materials, fabrication, systems integration and technology development.
MCM undertakes confidential engineering and development programmes where technical information, intellectual property, commercial interests or application details require controlled handling.
Projects can be undertaken under Non-Disclosure Agreements (NDAs), confidentiality agreements and project-specific contractual frameworks established before sensitive technical information is exchanged. The level of confidentiality and information access is defined according to the requirements of each engagement.
MCM maintains clear separation between client information, project-specific intellectual property and MCM’s pre-existing knowledge, methods and technologies. Ownership, licencing, usage rights and IP transfer arrangements are established contractually at the outset and recorded as part of the project scope.
CONFIDENTIALITY & IP
Non-Disclosure Agreements → NDA and confidentiality arrangements established before the exchange of sensitive information where required.
Project-Specific Confidentiality → Controlled handling of technical, commercial and application information throughout the engagement.
Intellectual Property Protection → Clear contractual definition of project IP, pre-existing IP, licencing and permitted use.
IP Ownership & Assignment → Ownership and transfer arrangements agreed with the client, including assigngment of project-specific IP where contractually specified.
Information Control → Access to sensitive project information limited to personnel and third parties with a defined requirement to access it.
Third-Party Disclosure → External suppliers, specialists and partners subject to appropriate confidentiality obligations where project information must be shared.
Technical Documentation → Controlled production and transfer of drawings, models, specifications, manufacturing data and other project documentation.
Project Completion & Handling → Agreed project outputs, documentation and applicable IP rights transferred or licensed in accordance with the contractual arrangements.
Commercial Sensitivity → Protection of commercially sensitive information development costs, manufacturing methods and strategic requirements.
Ongoing Obligations → Confidentiality and other contractual obligations can continue beyond completion of the engineering programme where required.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine - Specialist Automotive
ENGAGEMENT
Confidential programmes may incorporate MCM’s engineering, materials, manufacturing, fabrication and systems integration capabilities. Programme scope information requirements, commercial terms and IP arrangements are established on a project-specific basis.
CONFIDENTIAL PROGRAMME → STARTING AT £150,000.00
STRATEGIC / RESTRICTED PROGRAMME → STARTING AT £250,000.00
MCM MAY DECLINE SPPLICATIONS WHERE THE PROPOSED WORK FALLS OUTSIDE OF STRATEGIC &/OR REGIONAL PRIORITIES, TECHNICAL CAPABILITIES, COMMERCIAL REQUIREMENTS OR APPLICABLE LEGAL AND CONTRACTUAL OBLIGATIONS.
Mechanical Engineering, Product Design & Engineering Development
MCM provides mechanical engineering and product development services for complex components, assemblies and engineered systems.
We work form early-stage concepts through to detailed engineering definition, applying mechanical engineering, digital design and manufacturing knowledge to develop solutions that are technically defined and ready for the next stage of development or production.
Our engineers consider function, performance, materials, manufacturability and operating environment from the outset, reducing the separation between design and manufacture and allowing engineering decisions to be made with the complete development pathway in view.
CAPABILITIES
Mechanical Engineering → Component, assembly and mechanism design for demanding applications.
Product Design & Development → Development of products and engineered hardware from concept through technical definitions.
3D CAD & Digital Engineering → Detailed three-dimensional design, assemblies and digital product definition.
Design for Manufacture & Assembly → Design optimisation around selected manufacturing processes, materials and production requirements.
Reverse Engineering → Refinement of existing designs to improve performance, manufacturability, weight, durability or production efficiency.
Technical Definition → Engineering drawings, specifications, documentation and manufacturing information.
Prototype & Demonstrator Development → Engineering support for physical prototypes, test articles and technology demonstrators.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine - Specialist Automotive
MCM’s engineering capability can be engages as a focused technical service or as part of a wider development programme incorporating materials, manufacturing, fabrication, systems integration and technology development.
Composite Engineering, Carbon / Aramid Fibre & Advanced Material Development
MCM develops and manufactures components using advanced composite and polymer materials where conventional materials or manufacturing methods may not provide the required combination of performance, weight, durability or design freedom.
Our capability spans material selection, composite engineering, tooling and controlled manufacturing processes, with development focused on demanding industrial, aerospace, defence, marine and specialist applications.
We work with carbon & aramid fibre composites, advanced polymers and reinforced thermoplastics, selecting materials and processes according to the functional and environmental requirements of the application.
CAPABILITIES
Carbon / Aramid Fibre & Composite Engineering → Design and manufacture of carbon, aramid fibre and other fibre-reinforced composite components.
Composite Manufacturing → Vacuum-assisted and other controlled composite manufacturing processes for development and low-volume production.
Advanced Polymers → Engineering and processing of high-performance polymer materials for demanding applications.
PEEK & PPS Composites → Development and additive manufacturing using high-performance engineering thermoplastics, including reinforced grades.
Material Selection & Development → Selection and evaluation of materials and process routes against mechanical, thermal, environmental and manufacturing requirements.
Composite Tooling → Development of moulds, tooling and fixtures supporting repeatable composite manufacture.
Lightweight Structures → Development of lightweight components where wight reduction, stiffness, durability and or environmental resistance are critical.
Materials R&D → Investigation and development of material and process combinations for emerging engineering requirements.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine - Select Motorsport
MCM’s advanced materials capability can support individual component development through to larger programmes incorporating engineering, tooling, manufacturing, testing and technology development.
Systems Engineering, Integration & Complex Assembly
MCM integrates engineered components, technologies and subsystems into functional assemblies and technical demonstrators.
We bring together engineering, manufacturing and technology development capabilities to address requirements where multiple components or technical disciplines must operate as a coherent system.
Our approach considers interfaces, mechanical integration, manufacturability, testing and the intended operating environment throughout development.
CAPABILITIES
Systems Engineering & Integration → Development and integration of complex engineered and supporting subsystems.
Mechanical Systems Integration → Integration of components, mechanisms, structures and supporting hardware.
Subsystems Development → Engineering and integration of specialist subsystems within larger platforms or systems.
Interface Engineering → Definition and management of mechanical, physical and functional interfaces between components and subsystems.
Prototype & Demonstrator Integration → Assembly and integration of development hardware and technology demonstrators.
Testing & Validation → Support for functional testing, verification and validation of integrated systems.
Manufacturing Integration → Coordination of engineering and manufacturing activities required to deliver integrated assemblies.
Technology Integration → Integration of emerging technologies and engineered solutions into functional demonstrators and systems.
APPLICATIONS
Defence & Security - Aerospace - Advanced Industrial - Energy - Marine & Subsea - Select Automotive / Motorsport
MCM’s systems integration capability is intended for requirements where individual components must be engineered, manufactured and integrated as [art of a wider technical solution.
Our Process
Every engagement follows a structured process designed to establish the requirement, assess suitability and determine the appropriate route forward.
Establish Suitability
Applications may undergo technical, commercial and application-level assessment. NDAs or confidentiality agreements may be required before sensitive information is shared.
01 - INITIAL CONSULTATIONUnderstanding the Requirements
Begin with a complimentary 30-minute consultation to discuss your objectives, requirements and challenges, while identifying the MCM capabilities most relevant to your needs.
02 - ASSESSMENT & VETTINGDevelop. Manufacture. Validate
MCM delivers the agreed scope through the relevant combination of engineering, materials, materials, manufacturing, fabrication, systems integration and technology development capabilities.
03 - SCOPE & ENGAGEMENTDefine the Requirements
Once accepted, we establish the appropriate engagement, defining scope, deliverables, milestones, timescales and commercial framework required to progress the project effectively.
04 - ENGINEERING DELIVERYSTRATEGIC ALIGNMENT
MCM prioritises projects supporting advanced industrial capabilities and strategic technological capacity across the British Isles and wider industrial ecosystem. Certain applications may therefore not be accepted where they fall outside our strategic priorities and capabilities.